Commercial and industrial electrical contractors, in-house since 1973
Rossair delivers commercial and industrial electrical work with its own NICEIC-registered engineers - power and distribution, lighting, EICR testing, emergency lighting and fire alarms, EV charging and planned electrical maintenance. One contractor across electrical and mechanical, so the plant room has one accountable name.
What we deliver
Electrical contracting for commercial and industrial buildings
Rossair is an electrical contractor for offices, schools and colleges, NHS and care estates, industrial units and multi-site portfolios. We design, install, test and maintain the electrical side of a building alongside the HVAC and mechanical plant we already look after - so a distribution board upgrade, a new lighting scheme or a five-yearly EICR is handled by engineers who know the whole building, not a separate trade brought in for the day. Every installation is certificated to BS 7671 and the paperwork lands in your compliance pack.
- Power and distribution - mains, sub-mains, distribution boards, 3-phase supplies and load assessments
- Lighting - LED upgrades, new lighting schemes and controls for offices, classrooms, wards and warehouses
- EICR and fixed wire testing with the remedial work done by the same engineers
- Emergency lighting and fire alarm systems - design, installation, testing and servicing
- Commercial and workplace EV charger installation
- BMS and controls wiring for HVAC plant, interfaces and fire-alarm cause-and-effect
- Planned electrical maintenance under an SFG20-scheduled contract, with reactive cover for contract clients
Chichester College Group - mechanical, electrical and building services across 11 campuses for over 20 years
1973
Electrical and mechanical contractor since
11
Campuses under one contract
20+
Years with the same client
NICEIC
Registered electrical contractor
Chichester College Group describes Rossair as having supported the group "for some 20 years across mechanical, electrical and building services, including full environmental control and design" across all 11 campuses. That is what in-house electrical looks like in practice: the same engineers who maintain the heating and ventilation also test the installation, fix the faults and certificate the work. The Wembley Health Centre decarbonisation - a live NHS building taken fully off gas and onto electric heat - ran on the same principle.
Compliance
Compliance documentation included in every contract
- BS 7671IET Wiring Regulations, 18th Edition - every installation designed, installed and certificated to the current edition.
- NICEICNICEIC registration for electrical installation and inspection and testing certification.
- EAWR 1989Electricity at Work Regulations - the duty to keep electrical systems safe, evidenced by periodic EICR testing.
- BS 5266Emergency lighting design, installation and testing to BS 5266-1.
- BS 5839Fire detection and alarm systems designed, installed and serviced to BS 5839-1.
- SFG20Planned electrical maintenance scheduled to the SFG20 task library alongside the mechanical plant.
7 sectors
Sectors we serve
EducationCampus EICR cycles, lighting upgrades and electrical PPM around term timeNHS HealthcareElectrical work in live clinical environments with HTM-aware planningCareEmergency lighting, fire alarm and EICR compliance for care homesCommercialOffice power, lighting and testing with out-of-hours deliveryFacilities ManagementElectrical PPM and testing across multi-site FM portfoliosGovernment & DefenceElectrical installations on secure estates with cleared engineersAirportsAirside and terminal electrical work around critical systems
Electrical services
Electrical pages by service and area
Commercial EICR and fixed wire testingFive-yearly periodic inspection, C1 to C3 codes explained, remedials done by the same team.Commercial electrical maintenance contractsPlanned electrical PPM to SFG20, with reactive cover for contract clients.Emergency lighting and fire alarmsBS 5266 and BS 5839 systems designed, installed, tested and serviced.Commercial EV charger installationWorkplace and fleet charging with load management and DNO liaison in-house.Electrical contractors HampshireBasingstoke HQ - Southampton, Portsmouth, Winchester and the whole county.Electrical contractors LondonAldgate office - the City, West End, Canary Wharf and out to the M25.Electrical contractors GloucestershireGloucester, Cheltenham, Stroud, Tewkesbury, Cirencester and the M5 corridor.Electrical contractors BristolBristol, Bath and the West of England from the Gloucestershire teams, under an hour on the M5.Electrical contractors BirminghamBirmingham, Solihull, the Black Country and the West Midlands.Electrical contractors CardiffCardiff, Newport, Bridgend, Swansea and South Wales.Electrical contractors SwindonSwindon, Chippenham, Malmesbury and the M4 corridor through Wiltshire.MEP installationsElectrical delivered inside a full mechanical, electrical and plumbing package.M&E maintenanceMechanical and electrical plant maintained together under one SFG20 contract.
Frequently asked
Questions about our electrical services
What electrical services does Rossair provide?
Rossair is a commercial and industrial electrical contractor. We install and upgrade power and distribution (mains, sub-mains, distribution boards and 3-phase supplies), design and install lighting, carry out EICR and fixed wire testing, install and service emergency lighting and fire alarm systems, install commercial EV chargers, wire BMS and controls, and run planned electrical maintenance contracts. All work is carried out by our own NICEIC-registered engineers and certificated to BS 7671.
Is Rossair a commercial or an industrial electrical contractor?
Both. Commercial work covers offices, schools and colleges, NHS and care buildings, hotels and retail. Industrial work covers warehouses, manufacturing units and plant rooms where 3-phase distribution, motor control, machine supplies and high-bay lighting are the norm. The engineers, the certification and the compliance pack are the same; the design and the risk assessment are specific to the site.
Is Rossair NICEIC registered?
Yes. Rossair is NICEIC registered for electrical installation and for inspection and testing, so Electrical Installation Certificates, Minor Works Certificates and Electrical Installation Condition Reports are issued under the scheme. Rossair also holds Gas Safe and REFCOM F-Gas registration and is Constructionline and SafeContractor accredited.
Can electrical work be included in our existing maintenance contract?
Yes, and that is the usual arrangement. Electrical PPM tasks - distribution board inspections, emergency lighting tests, fire alarm servicing and the EICR cycle - sit on the same SFG20 schedule as the heating, ventilation and air conditioning plant. One account manager, one compliance pack, and reactive electrical cover under the same contract terms as the mechanical plant.
Which areas does Rossair cover for electrical work?
Hampshire and the south from the Basingstoke HQ, Greater London from the Aldgate office, and everywhere within about two hours of Gloucester from the engineering teams based in Gloucestershire - Gloucester, Cheltenham, Stroud, Tewkesbury and Cirencester, plus Bristol and Bath, Birmingham and the West Midlands, Cardiff and South Wales, and Swindon and Wiltshire. Multi-site clients across the UK are covered under one contract with regional engineer cover.
How quickly can Rossair attend an electrical fault?
Contract clients get 24/7 reactive cover, 365 days a year, with response times set out in the contract and a 24-hour job report after every attendance. New enquiries are called back within one working day.
If we’re not the right fit, we’ll tell you who is
Talk to our electrical team
Your enquiry goes to our technical team. We call back within one working day.